PUBLIC NOTICE Federal Communications Commission 445 12 th St., S.W. Washington, D.C. 20554 News Media Information 202 / 418-0500 Internet: https://www.fcc.gov TTY: 1-888-835-5322 DA: 17-1155 Released: November 29, 2017 OFFICE OF ENGINEERING AND TECHNOLOGY SEEKS COMMENT ON APPLICATION BY PERRY JOHNSON LABORATORY ACCREDITATION, INC (PJLA) FOR RECOGNITION AS A LABORATORY ACCREDITATION BODY FOR AUTHORITY TO ACCREDIT LABORATORIES IN THE UNITED STATES ET Docket No. 13-208 Comments Due: December 29, 2017 Reply Comments Due: January 16, 2018 Perry Johnson Laboratory Accreditation, Inc. (PJLA) has submitted a request with the Office of Engineering and Technology (OET) for recognition by the Commission as an accreditation body that performs accreditation of test laboratories under the Commission’s rules. 1 PJLA seeks to be an accreditation body for laboratories located in the United States for testing equipment for authorization under the Commission’s certification program of the Commission’s rules. 2 OET invites comment on the qualifications and capabilities of PJLA to accredit test laboratories that perform testing for EMC, radio, and telecommunications requirements under the Commission’s rules, and whether PJLA meets the minimum set of requirements as we describe below. To perform compliance testing that is acceptable under our certification program, a laboratory must be accredited by a body that the Commission has recognized as meeting our requirements for performing the accreditation of testing laboratories. 3 There are two ways that we recognize the accreditation of laboratories. A laboratory can be accredited by a body under the terms of an MRA, 4 or it can be designated for FCC recognition by an accreditation body recognized pursuant to Section 2.949 of our rules. PJLA is seeking recognition as a testing laboratory accrediting body under the second path. 1 On July 3, 2016, PJLA submitted documentation in support of its request with OET. Information provided by PJLA in support of its request has been included in this docket file. 2 See 47 CFR § 0.241(f) (delegating authority to the Chief, OET to make determinations regarding the acceptability of individual accrediting organizations and to enter into agreements with them to perform accreditation of test laboratories under the rules). 3 47 CFR § 2.948(e). Test laboratories that perform testing for devices subject to the Declaration of Conformity procedures that were in effect prior to November 2, 2017 may perform testing for devices subject to Declaration of Conformity until November 2, 2018 (47 CFR § 2.950(i)) and must be accredited and recognized for appropriate FCC scopes. 4 47 CFR § 2.948(f)(1). 2Section 2.949 of the Commission’s rules sets forth the requirements for the recognition of laboratory accreditation bodies. 5 An entity seeking to be recognized by the Commission as an accreditation body for test laboratories must demonstrate that it complies with applicable International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC) standards for recognizing such bodies and that it is competent in assessing test laboratories to perform measurements in support of the applicable FCC technical regulations. The ISO/IEC standard used for recognizing accreditation bodies is ISO/IEC 17011, Conformity assessment — General requirements for accreditation bodies accrediting conformity assessment bodies. Accreditation of test laboratories is to be based on ISO/IEC standard 17025, General requirements for the competence of testing and calibration laboratories, and on the FCC requirements. 6 It is the responsibility of the accreditation body to review the qualifications of a test laboratory's personnel, management systems, record keeping and reporting practices; to send recognized experts to observe testing at the laboratory; and to verify the testing laboratory’s competence to perform tests in accordance with FCC-related measurement procedures. OET has provided additional guidance on the type of information that an applicant who desires to be recognized by the Commission as a laboratory accreditation body should provide in support of its application: The accreditation body provides general information about its organization, including: (a) Contact information. (b) A general description of the organization. (c) Description of the scope of work for which it is seeking recognition. (d) The specific country in which the accreditation body is seeking to perform laboratory accreditations for the FCC rules. (e) Evidence that the accreditation body is authorized by the government in each country it plans to accredit testing laboratories, to test to the FCC requirements, to operate and perform accreditation services. This must include an explanation of any legal constraints with regards to the accrediting body’s authorization to operate in the specific country in which it plans to perform accreditations (e.g., whether it has the required licenses and approvals necessary to operate a business). (f) Evidence of ability to perform assessments in each country it plans to accredit testing laboratories. The accreditation body must describe the process it will use to address laboratory performance issues, including the withdrawal or suspension of the accreditation of a testing laboratory. To demonstrate its credentials and qualifications to perform accreditation of laboratories that test equipment to Commission requirements, an applicant shall provide, at a minimum, evidence of: (a) Successful completion of an ISO/IEC 17011:2004, “Conformity assessment – General requirements for accreditation bodies accrediting conformity assessment bodies” peer 5 47 CFR § 2.949. 6 See 47 CFR § 2.948(e). 3review, such as being a signatory to an accreditation agreement that is acceptable to the Commission. (b) Experience with the accreditation of electromagnetic compatibility (EMC), radio and telecommunications testing laboratories to ISO/IEC 17025:2005, “General Requirements for the Competence of Testing and Calibration Laboratories.” (c) Accreditation personnel/assessors with specific technical experience on the Commission equipment authorization rules and requirements. (d) Procedures and policies developed for the accreditation and designation of testing laboratories for FCC equipment authorization programs. Information provided by PJLA in support of its request has been included in the docket file. Additional information regarding PJLA may be found on its website or by contacting it directly. Tracy Szerszen President/Operations Manager Email: tszerszen@pjlabs.com Phone: 248-519-2603 Fax: 248-213-0737 Website: http://www.pjlabs.com/ OET invites comment on PJLA’s application to be recognized as an accreditation body of test laboratories under the Commission’s rules. Interested parties may file comments no later than December 29, 2017. Reply comments are due no later than January 14, 2018. All filings should be made in ET Docket No. 13-208 and specifically state that they pertain to PJLA’s July 3, 2016 request. Pursuant to sections 1.415 and 1.419 of the Commission’s rules, 47 CFR §§ 1.415, 1.419, interested parties may file comments and reply comments on or before the dates indicated on the first page of this document. Comments may be filed using the Commission’s Electronic Comment Filing System (ECFS). See Electronic Filing of Documents in Rulemaking Proceedings, 63 FR 24121 (1998). ? Electronic Filers: Comments may be filed electronically using the Internet by accessing the ECFS: http://apps.fcc.gov/ecfs/. ? Paper Filers: Parties who choose to file by paper must file an original and one copy of each filing. If more than one docket or rulemaking number appears in the caption of this proceeding, filers must submit two additional copies for each additional docket or rulemaking number. Filings can be sent by hand or messenger delivery, by commercial overnight courier, or by first- class or overnight U.S. Postal Service mail. All filings must be addressed to the Commission’s Secretary, Office of the Secretary, Federal Communications Commission. ? All hand-delivered or messenger-delivered paper filings for the Commission’s Secretary must be delivered to FCC Headquarters at 445 12 th St., SW, Room TW-A325, Washington, DC 20554. The filing hours are 8:00 a.m. to 7:00 p.m. All hand deliveries must be held together with rubber bands or fasteners. Any envelopes and boxes must be disposed of before entering the building. ? Commercial overnight mail (other than U.S. Postal Service Express Mail and Priority Mail) must be sent to 9300 East Hampton Drive, Capitol Heights, MD 20743. 4? U.S. Postal Service first-class, Express, and Priority mail must be addressed to 445 12 th Street, SW, Washington DC 20554. People with Disabilities: To request materials in accessible formats for people with disabilities (braille, large print, electronic files, audio format), send an e-mail to fcc504@fcc.gov or call the Consumer & Governmental Affairs Bureau at 202-418-0530 (voice), 202-418-0432 (tty). For more information or questions pertaining to this document, please contact George Tannahill at (301) 362-3026, george.tannahill@fcc.gov. -OET-