Connect America Cost Model Overview September 12, 2013 Agenda • Background • Key elements of model • Illustrative model outputs (inputs not adopted) • Resources 2 In the USF Transformation Order, the Commission decided to use a cost model to determine support for price cap carriers 3 • Delegated to Wireline Competition Bureau the task of adopting a cost model which must: – Estimate the forward-looking costs of an efficient provider – Estimate the cost of wireline network – Determine costs at a granular level – census block or smaller • Declined to modify its existing high-cost model, because new modeling techniques and capabilities significantly improve the accuracy of the modeled costs, for example, by estimating the costs of efficient routing along roads in a way that the older model cannot • Budgeted “up to” $1.8 billion (including CAF-ICC) for territories served by price cap carriers and their rate of return affiliates • Determined that model-based support will only be offered to areas where costs exceed a “Funding Threshold” and below an “Extremely High-Cost Threshold” • Concluded no Connect America Phase II high-cost funding for areas already served by an unsubsidized competitor Two components to the Connect America Cost Model • Cost model: calculates cost for all areas of the country – Network topology – Geo-spatial- (or GIS-) based routing to meet engineering constraints for a given network technology – Costing – determination of cost for that topology • Support model: calculates support for areas eligible for Connect America Phase II support – Calculated cost is an input – Exclude areas ineligible for Phase II support • Rate of return areas • Price cap census blocks served by an unsubsidized competitor (provider offering voice and 3/768 broadband) – Set lower threshold (benchmark or funding threshold) and upper threshold (alternative technology cutoff) so that support for eligible areas is within $1.8 billion budget • Support per location is the amount over the benchmark as long as the census blocks are not excluded by the alternative technology cutoff 4 Node00 Node0 Node4 Node3 Node2 The model uses passive Gigabit Passive Optical Network (GPON) Fiber to the Premises (FTTP) technology Splitter End-user location Every location passed by FTTP network Locations connected Pedestal Distribution Feeder Middle Mile/ IOF Drop Optical Networking Terminal (ONT), including voice gateway and battery Ring connecting COs to tandem/internet Router and VoIP platform Internet Central Office (CO) Optical Line Terminal (OLT) Routers Ethernet edge router 5 Cost model – network topology • “Simple” set of rules for all-IP FTTP (GPON) network based on standard engineering principles: – Network facilities to “pass” every location in the country (>160 million) -- essential network assets within a short distance of every location – with connections to central office currently serving each location – For each block or street segment, determine location of pedestal (node 3) by minimizing cost in trade-off between distribution plant and drop to individual locations – Determine number and location of splitters (node 2) so that all locations are within at most 5000-5,500 feet of splitter and splitter is equipped to serve up to 32 locations per GPON Feeder Fiber – Determine feeder path to connect splitters to central office using spanning tree optimization routines • Computationally intense – takes weeks for a national data run 6 Simple topology example #1: placing neighborhood pedestals (node 3) End-user location Possible “pedestal” location Too few pedestals Too-long drops and too much drop cost Too many pedestals Too much cost for pedestals More efficient Pedestals placed to “minimize” cost Road segment 7 ? ? ? Simple topology example #2: Placing FTTP splitters (node 2) End-user location Possible “pedestal” location Road segment Possible splitter location 10,000 feet Too costly: Poor splitter placement means needing two splitters More efficient: Use fewer splitters to serve the area 8 ? ? 9 Result is route-tracing, efficient network that connects pedestals to splitters via a road-tracing distribution network… © CostQuest Associates, Inc. Any use without permission is strictly prohibited Pedestals (node 3) Splitters (node 2) Central office (node 0) Distribution fiber …and connects splitters back to wire centers via feeder network 10 © CostQuest Associates, Inc. Any use without permission is strictly prohibited Pedestals (node 3) Splitters (node 2) Central office (node 0) Distribution fiber Feeder fiber Output of network topology: a large database that captures information relevant to calculating costs • Number of locations • Feet of feeder plant and distribution plant (and overlap between them) • Pedestals associated with block • Equipment and feet of transport (middle mile and/or undersea) for nodes (e.g., splitter, OLT, etc..) serving the block, apportioned back based on cost causation • Serving wire center (by Common Language Location Identifier or CLLI codes) • Area • Density zone • Terrain • Three-digit ZIP code 11 The model provides more information via user-configurable inputs • GIS-based information, based on density and terrain, used to calculate cost, including – Plant mix (mix of aerial, buried and underground facilities) – Tax rates – Regional cost adjustments • Cost per unit for each network asset, including – Fiber – Outside-plant structure (e.g., poles, conduit, manholes) – FTTP hardware (e.g., splitters, ONTs, OLTs) – Network hardware (e.g., optical add-drop multiplexers or OADMs, routers) • Asset lifetimes and cost of capital (through Annual Charge Factors) • Take rate (to determine number of drops and CPE in cost calculation) • Capacity demand • The bureau has not yet adopted inputs for the CAM 12 Illustrative cost calculation for aerial plant in suburban areas using model version 3.2 Fiber Materials Placement Structure + $0.444 /foot for 48-fiber bundle + $0.118 /foot material loading = $0.562 /foot + $1.185 placement / foot + $0.0053 admin cost/foot + $0.230 engineering cost/foot + $0.540 splicing cost/foot = $1.960 / foot + $214.61 per pole ? $1.25/foot + $86.56 per anchor ? $0.072/foot + $5.61 per guy ? $0.0046/foot + $0.131/foot for material loading = $1.459 / foot pre-sharing = $.7005 / foot including sharing + $452.97 per pole ? $2.64/foot + $184.25 per anchor ? $0.154/foot + $25.60 per guy ?$0.021/foot + $0.401 engineering cost/foot = $3.22 / foot pre-sharing = $1.54 / foot including sharing Total construction cost per foot for suburban aerial plant: $7.20 Aerial cost per foot for suburban for ILEC: $4.77 Total cost • Multiply all costs by Regional Cost Adjustment • For routes where feeder and distribution overlap, suburban aerial structure shared 78% of the time (i.e., less structure cost incurred) • Addition of state specific sales tax on material Additional adjustments 13 Illustrative cost calculation for buried plant in suburban, soft rock areas using model version 3.2 Fiber Materials Placement Structure + $0.466 /foot for 48-fiber bundle + $0.050 /foot material loading = $0.515/foot + $0.00 placement / foot + $0.0053 admin cost/foot + $0.001 engineering cost/foot + $0.531 splicing cost/foot = $.538 / foot NA + $6.87/foot for labor + $0.979/foot for engineering = $7.844 /foot pre-sharing = $6.275 / foot including sharing Total construction cost per foot for suburban, soft-rock, buried plant: $8.90 Buried cost per foot (suburban, soft-rock) for ILEC: $7.33 Total cost • Multiply all costs by Regional Cost Adjustment • For routes where feeder and distribution overlap, suburban aerial structure shared 41% of the time (i.e., less structure cost incurred) • Addition of state specific sales tax on material Additional adjustments 14 Illustrative cost calculation for underground plant in suburban, soft rock areas using model version 3.2 15 Fiber Materials Placement Structure + $0.445 /foot for 48-fiber bundle + $0.057 /foot material loading = $0.502 /foot + $2.289 placement / foot + $0.0053 admin cost/foot + $0.442 engineering cost/foot + $0.582 splicing cost/foot = $3.319 / foot + $3084.38 per manhole ? $3.43/foot + $2.04 / foot for duct + $0.714/foot for material loading = $6.18 / foot pre-sharing = $5.48/ foot including sharing + $3131.12 per manhole ? $3.48/foot + $0.71/foot for duct (no sharing) + $11.88/foot for excavation + $2.29 engineering cost/foot = $18.36 / foot pre-sharing = $14.75 / foot including sharing Total construction cost per foot for suburban, soft-rock, underground plant: $28.37 Underground cost per foot (suburban, soft-rock) for ILEC: $24.05 Total cost • Multiply all costs by Regional Cost Adjustment • For routes where feeder and distribution overlap, suburban aerial structure shared 67% of the time (i.e., less structure cost incurred) • Addition of state specific sales tax on material Additional adjustments Sources for aerial plant cost calculation Fiber Materials Placement Structure • Fiber Material: Size 24 Aerial Material cost: $0.3135/foot * 1.42 for 48-fiber cable = $0.444 per foot • Labor Rates and Loadings: AerialFO Total Material Loadings: .265177 ? $0.118 per foot • Material Labor: AerialFO Placing cost per foot: $0.836 * .142 for 48-fiber cable = $1.185 per foot • Material Labor: AerialFO Telco admin cost per foot: $0.0053 • Labor Rates and Loadings: AerialFO Engineering rate: .1925 ? $0.230 per foot • Splicing (see “Sources for Splicing” slide): $0.540 per foot • Structure Material: Size 35 Material cost per pole: $214.61 • Engineering rules: Size 35 pole spacing: 200 feet • Engineering rules: Typical aerial span: 1200 feet ?7 poles over 1200 feet • Structure Material: $86.56 per anchor • Structure Materials: $0.11 per guy per foot • Engineering rules: Guy length to pole height ratio: 1.5 ? $5.61 per guy (size 35 pole) • Engineering rules: Typical guy span: 1200 feet • Labor Rates and Loadings: Pole Total Material Loadings: .098305 ? $0.131 per foot • Plant Sharing Tables: Aerial 48% • Structure Labor: Size 35 pole: $452.97 per pole • Engineering rules: Size 35 pole spacing: 200 feet • Engineering rules: Typical aerial span: 1200 feet ?7 poles over 1200 feet • Structure Labor: Size 35 pole: $452.97 per pole • Structure Labor: $184.25 per anchor • Structure Labor: : $25.60 per guy • Engineering rules: Typical guy span: 1200 feet • Labor Rates and Loadings: Pole: .1425 for engineering ? $.401 per foot • Plant Sharing Tables: Aerial 48% 16 Sources for buried plant cost calculation Fiber Materials Placement Structure • Fiber Material: Size 24 Underground Material cost: $0.32878/foot * 1.42 for 48-fiber cable = $0.466 per foot • Labor Rates and Loadings: BuriedFO Total Material Loadings: .106440 ? $0.050 per foot • Material Labor: UndergroundFO Placing cost per foot: $0.00 • Material Labor: AerialFO Telco admin cost per foot: $0.0053 • Labor Rates and Loadings: AerialFO Engineering rate: .1925 ? $0.001 per foot • Splicing (see “Sources for Splicing” slide): $0.531 per foot • NA • Structure Labor: Buried excavation, suburban soft rock: $6.87 per foot • Labor Rates and Loadings: Conduit: .1425 for engineering ? $0.979 per foot • Plant Sharing Tables: Suburban, buried: 80% 17 Sources for underground plant cost calculation Fiber Materials Placement Structure • Fiber Material: Size 24 Underground Material cost: $0.31407/foot* 1.42 for 48-fiber cable = $0.445 per foot • Labor Rates and Loadings: UndergroundFO Total Material Loadings: .127821 ? $0.057 per foot • Material Labor: UndergroundFO Placing cost per foot: $1.62* .142 for 48-fiber cable = $2.29 per foot • Material Labor: AerialFO Telco admin cost per foot: $0.0053 • Labor Rates and Loadings: AerialFO Engineering rate: .1925 ? $0.442 per foot • Splicing (see “Sources for Splicing” slide): $0.582 per foot • Structure Material: Size 3 manhole: $3084.38 • Engineering rules: Size 3 manhole spacing: 900 feet • Structure Material: Duct cost: $2.04/foot • Labor Rates and Loadings: Conduit: .130561 ? $0.714 per foot • Plant Sharing Tables: Suburban, underground: 80% (conduits are not shared) • Structure Labor: Size 3, soft-rock manhole: $3131.12 per manhole • Engineering rules: Size 3 manhole spacing: 900 feet • Structure Labor: Underground excavation, suburban soft rock: $11.88 per foot • Structure Labor: Underground duct labor: $0.71 per foot • Labor Rates and Loadings: Conduit: .1425 for engineering ? $2.29 per foot • Plant Sharing Tables: Suburban, underground: 80% (conduits are not shared) 18 Sources for splicing cost 19 Closure and setup Aerial • Material Labor: $83.85 • Labor Rates and Loadings: Engineering rate 0.1925 ? $16.14 per splice • $0.084 / foot Buried • Material Labor: $87.60 • Labor Rates and Loadings: Engineering rate 0.1925 ? $16.86 per splice • $0.088/ foot Underground • Material Labor: $121.80 • Labor Rates and Loadings: Engineering rate 0.1925 ? $23.45 per splice • $0 .122 /foot Occurrences per foot (typical) determined by model/topology: 0.00084 (1 per 1189 feet) Splice cost • Material Labor: $9.72 / fiber • Labor Rates and Loadings: Engineering rate 0.1925 ? $1.87 per splice • $0.456 / foot • Material Labor: $9.46 /fiber • Labor Rates and Loadings: Engineering rate 0.1925 ? $1.82 per splice • $0.443/ foot • Material Labor: $9.83/fiber • Labor Rates and Loadings: Engineering rate 0.1925 ? $1.89 per splice • $ 0.460 /foot Occurrences per foot (typical) determined by model/topology: 0.0393 (24 splices every 611 feet) Number of splices driven by network topology – splices are assumed wherever there is a branch (a “Y”) in the network or when the number of strands drops enough to move to a smaller cable Total • $0.540 / foot • $0.531 / foot • $0.582 / foot Illustrative construction costs per foot assuming 48-fiber bundles, 35-foot poles and no regional cost adjustment 23.74 4.617.20 24.31 5.367.20 27.75 6.997.20 Aerial Underground Buried Normal Soft rock Hard rock Rural Suburban Urban 28.35 8.807.20 28.37 8.907.20 32.99 10.147.20 Aerial Underground Buried 33.37 10.84 7.20 33.37 10.84 7.20 38.85 10.84 7.20 Aerial Underground Buried 20 Calculating annual cost of initial investment: levelization using Annual Charge Factors • Annual Charge Factors (ACFs) relate the initial investment to the cost over the useful lifetime of each asset – Based on lifetimes for each asset class using retirement curves – Includes future net salvage value or future net salvage cost as appropriate – Captures capital recovery (DEPR), and post-tax cost of money (COM and TAX) • The model tracks each asset class separately (despite prior cost per foot calculation) • Output is a cost per month for each asset attributable to each census block. Asset classes include: – Aerial Fiber – Buried Fiber – Underground Fiber – Conduit – Circuit (network electronics) • And excel-based model (called the “CapCost model”) is available to calculate ACFs for different assumptions 21 Calculating operating expenses 22 Plant non-specific opex = total plant investment * (network PNS factor * (1 + size factor)) Overhead G&A = total plant investment * (overhead G&A factor * (1 + size factor)) Cust. ops & mark. opex = Customers * (Ops per customer * (1 + size factor)) Bad debt = Customers * (Bad debt per customer) Plant specific opex = investment * ( opex factor * (1 + size factor)) Plant type Plant types: • Aerial fiber optic • Poles • Buried fiber optic • Underground fiber optic • Conduit systems • Circuit Network plant specific opex (scales with investment in each plant type) Non-network plant specific opex (scales with total investment) Additional opex (scales with number of customers) Plant type Plant type Network opex and G&A per location per month Illustrative investment and investment-driven operating expenses per location by company* 23 PUERTO RICO TELEPHONE CO. 1,096 CINCINNATI BELL 1,146 HAWAIIAN TELCOM 1,674 CONSOLIDATED 1,729 CENTURYLINK 1,756 FAIRPOINT 1,998 WINDSTREAM 2,380 FRONTIER 2,404 ACS 3,457 2,809 Verizon 1,313 AT&T 1,364 MICRONESIAN TELECOMM INNOVATIVE TELEPHONE (USVI) 2,060 7.44 7.82 10.81 10.60 10.55 11.20 13.20 13.56 20.37 22.58 9.07 8.99 17.09 Investment per location * Illustrative results for model v3.2 using 8% cost of money Illustrative cost per location per month varies widely around the country* 1 10 100 1,000 10,000 0% 20% 40% 60% 80% 100% 24 Cost per location by percentile $ per location per month Median cost: $26.85 20 30 40 50 60 * Illustrative results for cost model v3.2 using 8% cost of money Overall model results by cost category* 100 21 Total Bad debt 3 G&A 13 Customer operations and marketing 21 Network operations 17 Tax 7 Cost of money 17 Capital recovery (DEPR) Breakout of costs for the country % of total cost 25 * Illustrative results for cost model v3.2 using 8% cost of money Support model: setting eligibility and thresholds to provide support within the budget 26 H ig he r co st Setting the upper threshold “We anticipate that less—and possibly much less—than one percent of all U.S. residences are likely to fall above the ‘extremely high-cost’ threshold in the final cost model” (fn 274) Setting the lower threshold “[W]e will use the model to identify those census blocks where the cost of service is likely to be higher than can be supported through reasonable end-user rates alone, and, therefore, should be eligible for CAF support.” (Ά 167) Treatment of areas served by competition “[W]e will also exclude areas where an unsubsidized competitor offers broadband service that meets the broadband performance requirements. . . .” (Ά 170) Low cost Phase II areas Costs above benchmark for locations with cost below the cutoff are eligible for funding…if there are no unsubsidized competitors 27 0 50 100 150 200 250 300 Illustrative benchmark* Illustrative cutoff* 85th percentile costs Most expensive Over upper threshold Phase II eligible Below lower threshold Benchmark Cutoff * Figures selected for illustration; the Bureau has not yet determined these cutoffs Illustrative results currently posted on FCC website – introduction page 28 Two illustrative values for cost of money Three illustrative values for benchmark Illustrative results posted on FCC website 29 Support available and number of locations covered for illustrative values Breakouts by state, carrier and study area Additional information • Access to the model: Parties must follow the terms of the Third Supplemental Protective Order to access the model; available at http://www.fcc.gov/document/connect-america-phase-ii-third- supplemental-protective-order. The TSPO includes – Acknowledgement of Confidentiality – Licensing Agreement – Non-Disclosure Agreement (provides access to source code and “Systems Evaluator” package) • The current version of CAM is available at https://cacm.usac.org • Additional resources and information available on CACM website, including: – User Guide – Frequently Asked Questions and link to CAM Support desk (CACMsupport @costquest.com) – Capex Tutorial – Opex Overview – Model inputs and results from various model runs • In addition, model documentation and illustrative results available on FCC website: – http://transition.fcc.gov/Daily_Releases/Daily_Business/2013/db0624/DOC-321774A1.pdf – http://www.fcc.gov/encyclopedia/connect-america-cost-model-illustrative-results • Links to all these resources and more can be found at http://www.fcc.gov/encyclopedia/caf-phase-ii- models 30 Thank you! 31 Cable footprint (NTIA/SBI round 6, as of June 2012) 32 Fixed wireless footprint (NTIA/SBI round 6, as of June 2012) 33